Re: Bottom row of labels empty
From: Duane Hookom (duanehookom_at_NoSpamHotmail.com)
Date: 11/05/04
- Next message: dogmelissa: "Summing on a per-day basis"
- Previous message: Fons Ponsioen: "RE: Filename"
- In reply to: Gerald Lindinger: "Re: Bottom row of labels empty"
- Messages sorted by: [ date ] [ thread ]
Date: Fri, 5 Nov 2004 10:14:04 -0600
According to my calculations assuming A4 paper (297 mm height), you won't
get this to work. Your printer is not capable of printing close enough to
either the top or bottom of the page.
1,69 + 12.45 + (8*37) >310
Normally inkjet label paper "burns" half label (18.5 mm) at the top and half
label at the bottom.
-- Duane Hookom MS Access MVP -- "Gerald Lindinger" <GeraldLindinger@discussions.microsoft.com> wrote in message news:A8D5B96F-2F8B-4C85-B8B7-CAE3D3529A26@microsoft.com... > Labels are Zweckform 3474 > Height = 3,7 cm (3,709 created in the report by the label assistant) > > Number of labels = 8 > > Space above the top label on your paper: approx. 0.4mm > Space below the bottom label on your paper: approx. 0.4mm > > Minimum top margin allowed by your printer: 1,69 mm > Minimum bottom margin allowed by your printer: 12,45 mm > > Gerald Lindinger > > "Duane Hookom" wrote: > >> Do you mind providing: >> Height of your labels: >> Number of labels down: >> Space above the top label on your paper: >> Space below the bottom label on your paper: >> Minimum top margin allowed by your printer: >> Minimum bottom margin allowed by your printer: >> >> -- >> Duane Hookom >> MS Access MVP >> -- >> >> "Gerald Lindinger" <GeraldLindinger@discussions.microsoft.com> wrote in >> message news:8EACD51F-5034-48D4-AB1F-9D0A0303254A@microsoft.com... >> >I have the same problem already posted earlier, but the answer >> > >> >>This is normally due to printers that can't print within 1/2" from the >> >>bottom of the page. You may need to: >> >>Decrease your top margin by a small amount >> >>Add the same small amount to your bottom margin >> >>Move controls on the report down the same small amount >> >>-- >> >> Duane Hookom >> >> MS Access MVP >> > >> > do not help me (I tried on several HP-Ink Jets). >> > >> > Even if I go to the minimum at top and bottom margin (I entered on both >> > top >> > and bottom a "0" and got so finally the minimal value, when I reopend >> > the >> > page settings), the last row is blank ? >> > >> > Then I increased the bottom value several times by small values, but >> > this >> > did not change anything ? >> > It seems to me, that the sum of the vertical size of all labels always >> > is >> > greater than the printable size. Only if I reduce the vertical size of >> > the >> > labels in the report, than it works, but than the position of the text >> > on >> > the >> > labels of the Zweckform 3474 changes from top to bottom. >> > >> > Thanks >> > Gerald Lindinger >> > >> >> >>
- Next message: dogmelissa: "Summing on a per-day basis"
- Previous message: Fons Ponsioen: "RE: Filename"
- In reply to: Gerald Lindinger: "Re: Bottom row of labels empty"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
