Re: Why last line prints on second page
- From: tjsmags <tjsmags@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Fri, 7 Mar 2008 13:25:01 -0800
The image is 1.175" (h and w) for both old and new clipart/logo. The page
header is 1.175" for both old and new, as stated in my previous email.
I just need to know what I can do so that I am able to ADJUST the BOTTOM
margin...something must be too big that it won't let me change it to .3"
since it automatically changes back to .5".
"Mark A. Sam" wrote:
If you changed the logo and the problem began, then that is the problem..
Check the properties of the old logo against the new, Top, Left, and Height.
Then the new header height against the old. I suspect that when you changed
logos you probably changed the header height.
"tjsmags" <tjsmags@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:4F0A92FD-9FAF-4E06-B33A-004243F3BBC8@xxxxxxxxxxxxxxxx
I've compared the old file (with the old logo at the top) with the new
file
(that I inserted a different logo...this is when it started printing the
last
line on the top of the 2nd page).
The only difference I have in any measurement I thought to look at was the
BOTTOM MARGIN. The old report says .3, while the new one says .5.
Everytime
I try to change the .5 to a .3 it automatically puts it back to .5.
I don't know what to do next.
These are the measurements I have:
form=7.9"
page header=1.175" height
detail=17.8333" height
page footer=.25" height
margins=
t=.3
b=.5
l=.3
r=.3
columns=
size=
w=7.9"
h=17.8333"
and there's a check mark in the 'same as detail' box
"Mark A. Sam" wrote:
First check your footer and header sections that they haven't changed.
To
correct the problem, you could tighten up the form, to make the header,
detail, and/or footer section smaller.
"tjsmags" <tjsmags@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:2B19EA05-E931-4BCA-871F-4FA3D2DA6A98@xxxxxxxxxxxxxxxx
I created a form first, and then a report (by copying and pasting from
the
form) to try to get around my problem. But, both give me the same
result.the
last line prints at the top of the 2nd page. This originally worked
fine,
but once I changed the logo (i.e. picture) in the upper left corner it
has
given me this problem.
I wrote down the PROPERTIES for the page header/detail/page footer of
my
ORIGINAL form that printed okay. I also wrote down the entire form's
property (i.e. width) and also the page setup (T/B/L/R margins and
column
size). I tried changing the new form to match these same properties,
but
when I would type in a value, say bottom margin change from .5" to .3",
it
automatically changes the value back to .5".
How do I make this work?
Thanks.
"Mark A. Sam" wrote:
Do you have a page break on the form?
"tjsmags" <tjsmags@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:9EAA3194-B579-4991-8C85-E20CDB913662@xxxxxxxxxxxxxxxx
OK, so I've copied and pasted the form into a REPORT. The exact
same
thing
is happening...the last line is printing at the top of the 2nd page.
Now
how
do I alter this...it worked at some point!
- Follow-Ups:
- Re: Why last line prints on second page
- From: Mark A. Sam
- Re: Why last line prints on second page
- References:
- Re: Why last line prints on second page
- From: tjsmags
- Re: Why last line prints on second page
- From: Mark A. Sam
- Re: Why last line prints on second page
- From: tjsmags
- Re: Why last line prints on second page
- From: Mark A. Sam
- Re: Why last line prints on second page
- Prev by Date: Link between switching subforms
- Next by Date: Re: Hide check box if text box is blank
- Previous by thread: Re: Why last line prints on second page
- Next by thread: Re: Why last line prints on second page
- Index(es):
Relevant Pages
|
Loading
