Re: Why last line prints on second page

I've compared the old file (with the old logo at the top) with the new file
(that I inserted a different logo...this is when it started printing the last
line on the top of the 2nd page).

The only difference I have in any measurement I thought to look at was the
BOTTOM MARGIN. The old report says .3, while the new one says .5. Everytime
I try to change the .5 to a .3 it automatically puts it back to .5.

I don't know what to do next.

These are the measurements I have:
form=7.9"
page header=1.175" height
detail=17.8333" height
page footer=.25" height

margins=
t=.3
b=.5
l=.3
r=.3

columns=
size=
w=7.9"
h=17.8333"
and there's a check mark in the 'same as detail' box

"Mark A. Sam" wrote:

First check your footer and header sections that they haven't changed. To
correct the problem, you could tighten up the form, to make the header,
detail, and/or footer section smaller.


"tjsmags" <tjsmags@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:2B19EA05-E931-4BCA-871F-4FA3D2DA6A98@xxxxxxxxxxxxxxxx
I created a form first, and then a report (by copying and pasting from the
form) to try to get around my problem. But, both give me the same
result.the
last line prints at the top of the 2nd page. This originally worked fine,
but once I changed the logo (i.e. picture) in the upper left corner it has
given me this problem.

I wrote down the PROPERTIES for the page header/detail/page footer of my
ORIGINAL form that printed okay. I also wrote down the entire form's
property (i.e. width) and also the page setup (T/B/L/R margins and column
size). I tried changing the new form to match these same properties, but
when I would type in a value, say bottom margin change from .5" to .3", it
automatically changes the value back to .5".

How do I make this work?

Thanks.



"Mark A. Sam" wrote:

Do you have a page break on the form?

"tjsmags" <tjsmags@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:9EAA3194-B579-4991-8C85-E20CDB913662@xxxxxxxxxxxxxxxx
OK, so I've copied and pasted the form into a REPORT. The exact same
thing
is happening...the last line is printing at the top of the 2nd page.
Now
how
do I alter this...it worked at some point!






.

Relevant Pages

  • Re: Why last line prints on second page
    ... Check the properties of the old logo against the new, Top, Left, and Height. ... Then the new header height against the old. ... "Mark A. Sam" wrote: ... when I would type in a value, say bottom margin change from .5" to .3", ...
    (microsoft.public.access.forms)
  • Re: Why last line prints on second page
    ... "Mark A. Sam" wrote: ... Check the properties of the old logo against the new, Top, Left, and Height. ... Then the new header height against the old. ... when I would type in a value, say bottom margin change from .5" to .3", ...
    (microsoft.public.access.forms)
  • Re: Hidden JPEG in footer
    ... Another fix is to adjust is the bottom margin in your document. ... While in the footer with the logo displayed, ...
    (microsoft.public.word.docmanagement)
  • Re: Entire page does not print in Word 2003
    ... If the bottom margin is 2.67" and this is an HP LaserJet, ... "margin fix" drivers from http://www.hp.com/pond/ljbeta/index.html ... Microsoft MVP ... only printing 2/3 of the page and no footer. ...
    (microsoft.public.word.application.errors)
  • Re: word margins wont change from 2.67! Cutting off printout! HELP!
    ... If you're printing to an HP LaserJet, this is a common printer driver ... Word MVP FAQ site: http://word.mvps.org ... > my side or bottom margin from 2.67. ...
    (microsoft.public.word.docmanagement)
Loading