Re: Caller ID

I found how to talk to the modem using MSCOMM32.OCX at yes-tele.com

Qhere woulid I find info of the modem API's so I could talke to a windows
modem that does not really have a com port?

Thanks
Kirk
"Dave" <noone@xxxxxxxxxxx> wrote in message
news:TuadndmrLLQPqKDeRVn-vg@xxxxxxxxxxxxxx
> ok, so you aren't planning to use a modem api, you just want the serial
> data. so you open the modem using its com port and talk to it like a com
> port... but nothing else will be able to open that port while you are
> monitoring it.
>
> "Kirk Groome" <kirk@xxxxxxxxxxxxxxx> wrote in message
> news:eWeBenbxFHA.1028@xxxxxxxxxxxxxxxxxxxxxxx
>> Send AT+VCID=1 to the modem and when a call comes in the modem will send
>> out a RING and then caller id info
>>
>> Kirk
>>
>> "Dave" <noone@xxxxxxxxxxx> wrote in message
>> news:LpadnQv52Imfz6HeRVn-1w@xxxxxxxxxxxxxx
>>> what type of 'commands' do you have?
>>>
>>> "Kirk Groome" <kirk@xxxxxxxxxxxxxxx> wrote in message
>>> news:OINW2PTxFHA.3180@xxxxxxxxxxxxxxxxxxxxxxx
>>>>I know the commands to get the modem to return the caller id but how do
>>>>you get access to talk to the modem.
>>>>
>>>> Kirk
>>>>
>>>> "Dave" <noone@xxxxxxxxxxx> wrote in message
>>>> news:OWL1mCTxFHA.2932@xxxxxxxxxxxxxxxxxxxxxxx
>>>>> that information would have to come from something that comes with the
>>>>> modem. see if the manufacturer has a developer kit available or some
>>>>> other specification for interfacing to their drivers.
>>>>>
>>>>> "Kirk Groome" <kirk@xxxxxxxxxxxxxxx> wrote in message
>>>>> news:OP0$xtSxFHA.1168@xxxxxxxxxxxxxxxxxxxxxxx
>>>>>>I have a database and I would like to capture caller ID and popup a
>>>>>>form when a call comes in with information from the database about the
>>>>>>call. I'm not finding any thing about how to capture the caller id
>>>>>>from the modem. It would be a great help if someone coule please point
>>>>>>me where I could start to capture the caller id.
>>>>>>
>>>>>> Thanks
>>>>>> Kirk Groome
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>


.

Relevant Pages

  • Re: Setting hardware flow control on serial port
    ... configure and check HW flow control. ... In my modem initialization string I ... Turning on hardware flow control on the port is important in getting the modem to work properly and for best performance. ... Using the hardwired device file with hardware flow control, you should be able to communicate with the modem with the kermit ...
    (comp.sys.hp.hpux)
  • Debranded Presario Desktop Reviewed
    ... The box is a debranded Presario desktop, sold with model number TS-XN0102RS, ... which is occupied by the useless modem and one PCI-E slot. ... Ethernet port. ... useless modem card has line in only. ...
    (comp.unix.bsd.freebsd.misc)
  • Re: ive tried that too
    ... I'm thinking you should only be handling the modem device, ... and not the port in this case. ... when i run it connected to the internal modem port, ... program hangs without any connection being established. ...
    (microsoft.public.vb.general.discussion)
  • Re: Change COM port
    ... software and physically remove your modem so that you can reboot the system ... with DOS and DOS based Windows.. ... I remember the days going> back to DOS 6.22, when in connecting up a modem, it had to> be set, and sometimes jumpered, for appropriate COM port. ... >> connections), ...
    (microsoft.public.windowsxp.basics)
  • Re: ive tried that too
    ... > I'm thinking you should only be handling the modem device, ... > and not the port in this case. ... > when i run it connected to the internal modem port, ... > program hangs without any connection being established. ...
    (microsoft.public.vb.general.discussion)
Loading